Cutting Sink Hole In Wood Countertop. Step 2 - Start the Cut. Rough-cut the hole with whatever you want Sawzall jigsaw hatchet then from the top of the slab pattern cut the hole as deep as you can with a router and top-bearing bit.
Using your drill with an appropriate drill bit start a cut on the countertop. For the Pedraza kitchen it required an 8 foot countertop and a 12 foot countertop. Such as a Roto-Zip or Ryobi 18V.
Because laminate countertop is a relatively soft material a normal circular saw blade for cutting wood is capable of cutting through it with ease.
Install an a front sink in easy ways to cut laminate countertop sink hole cut and polishing hine laminate countertop thriftyfun sink holes in granite counters How To Cut A Hole In Laminate Countertop Howtospecialist Build By Diy PlansCutting A Hole In Countertop For The Sink DummiesCut A Laminate Countertop For Sink Fine HomebuildingCut A. Drill two starter holes in opposite corners just inside the cutting line. Put the sink upside down on the worktop get it in the position you want then draw a line around the outside of the sink and remove sink now take tape measure and measure in from the lines 12 into the area of the sink on all 4 side and now cut the inner marks with jigsaw this will give you 12 all round Elaine on Jul 31 2019. Once the countertops were cut and dry fit to the cabinets and wallsit was time to cut the sink hole.
