How To Scribe A Countertop. You will see that one side is touching the wall and one side has a gap. If you cant see the pencil line because of the colour of the counter put masking tape down first and draw on the tape.
Cut two pieces of 14 hardboard each a couple of inches longer than half of the wood top. Lay the two pieces in the space tight against the walls and mark one piece where they overlap at the center. Scribe one piece to fit the left wall and back wall.
Scribe one piece to fit the left wall and back wall.
Scribe and fit this side I used to use a belt sander with a coarse belt belt running from the finish side of the formica toward the plywood side to prevent chipping or lifting the veneer. If you do both at once no point on your scribe will end up directly opposite where you scribed from. Cut two pieces of 14 hardboard each a couple of inches longer than half of the wood top. Cut that piece on the line.
